江苏美国LECO分析仪咨询报价

User-Friendly Brand Software Cornerstone

LECO's exclusive brand software enables the user to have complete access to analysis Cornerstone control, method settings, diagnostics, reporting, and more in a highly organized and immersive environment. Designed through a collaboration of customer feedback and innovative engineering,Cornerstone allows the user to conduct all of their day-to-day operations within a single Analysis screen designed for speed and ease-of-use. Our innovative grouping of sample data into sets and replicates simplifies the data output and automatically calculates relevant statistics, alleviating the need for additional data processing.

氧氮氢分析仪怎么选？欢迎联系上海禹重科技，我司产品质量保证，欢迎咨询！江苏美国LECO分析仪咨询报价

Procedure – Powder/Chip Samples

Prepare the instrument as outlined in the operator's instruction manual.

Login a minimum of three Blank reps.

Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open. Insert a *** Nickel Capsule (leave capsule open) into the open port at top of loading head.

Note: samples using automation should be placed in the appropriate autoloader position before starting the analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.

美国LECO力可氧氮氢分析仪ONH836（氧氮氢联测仪）系列硬件部分

特点和优势

1、炉头区域LED照明系统

2、炉头快速拆装的粉尘过滤装置

3、装有自动旁路阀的可快速拆装氧水捕集装置

4、**的动态流量补偿（DFC）保证热导池气体流量、压力恒定

5、改进的红外检测池技术

     新红外池的恒温绝热技术消除了外界环境温度的干扰

   长寿命的红外发射光源和无漂移的电路设计保证红外检测池的长期稳定

   氧高低双量程采用3个碳红外检测器，同时检测一氧化碳和二氧化碳，保证准确定量

  6、高效脉冲炉冷却系统

   强力内循环水冷装置

   双直流风扇保证持续冷却，不受电压波动的影响

   新电极炉头设计，提高脉冲炉热交换效率

  7、全自动分析系统（可选）

   自动清扫装置

   20位或100位全自动分析系统

   高速全自动真空除尘装置直接将粉尘排至仪器外部捕集器中，消除环境污染

Oxygen, Nitrogen, and Hydrogen in Refractory Metals

Summary

Oxygen and nitrogen are alloying elements in titanium, and are also classified as alpha stabilizing elements as they promote alpha phase alloys. Interstitial oxygen and nitrogen levels can be used to regulate the tensile strength of the material, but due to its high solubility can cause unwanted surface embrittlement. This phenomenon can be leveraged,however, under controlled processing to create surface films that increase surface hardness and wear properties.

力可ONH836氧氮氢分析仪

特点和优势

国际**的非色散红外及热导检测器 ，无移动部件，不需要手动调整

采用三个**的红外器检测氧含量，同时检测CO和CO2，然后在转化为CO2集中检测，原理上是**完善的，所以不仅可以保证中间量程的测量精度，在**含量和高含量的检测范围内同样可以满足精度要求

高性能的红外检测器配置***恒温绝热技术，消除了外界环境温度的干扰

长寿命的红外发射光源和无漂移的电路设计保证检测器的长期稳定性

力可**的动态流量补偿控制DFC系统，保证了流量系统的完善，可以精确控制整个气路中的流量，保持流量恒定**改善了材料中氮分析的准确度

可以旁路的OMI-2 气路强化过滤装置增强了检测器的稳定性，使得分析结果更加准确

可选自动功能

20位试样自动进样系统

通用下电极坩埚支座，容纳各种坩埚使用

无需人工干预的全自动清扫系统

通用下电极坩埚支座，容纳各种坩埚使用。江苏美国LECO分析仪咨询报价

***触摸屏技术，用户友好界面软件进行校正、分析、诊断等。江苏美国LECO分析仪咨询报价

Determine the instrument blank.

a. Login a minimum of 3 Blank replicates.

b. Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.

c. Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

d. Clean the upper and lower electrode manually, or, if applicable, remove thecrucible and press the analyze button to clean with the automatic cleaner.

e. Firmly place a graphite crucible on the lower electrode tip.

f. Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and endautomatically.

g. Repeat steps 2b through 2f a minimum of three times.

h. Set the blank following the procedure outlined in the operator's instruction manual.

江苏美国LECO分析仪咨询报价