陇博智能科技EP系列小五金多品种加工难题，-20℃极寒环境稳

南京陇博智能科技有限公司推出的纯电小型折弯机EP系列针对小五金钣金痛点实现技术飞跃：智能工艺数据库自动匹配不锈钢、铝合金等混合材质参数，良品率达99.2%；-20℃低温无需预热即可稳定作业，保障北方户外施工进度；配备AI模具识别系统，扫码自动加载参数，换模时间*1分钟。内蒙古某护栏厂冬季连续作业3000小时，折弯角度偏差稳定在±0.5°内。典型案例中，江苏家具厂加工异形金属桌椅腿，日产量500件定制件，人力成本降60%。其±0.01mm定位精度及每分钟15次折弯速度，较液压机效率提升2倍。

The EP series of pure electric small bending machines launched by Nanjing Longbo Intelligent Technology Co., Ltd. has achieved a technological leap to address the pain points of small hardware sheet metal processing: The intelligent process database automatically matches parameters for mixed materials such as stainless steel and aluminum alloy, with a pass rate of 99.2%; -20℃ low temperature operation can be stable without preheating, ensuring the progress of outdoor construction in northern regions; equipped with an AI mold recognition system, scanning can automatically load parameters, and the mold change time is only 1 minute. A certain guardrail factory in Inner Mongolia operated continuously for 3,000 hours in winter, with the bending angle deviation remaining stable within ±0.5°. In a typical case, a furniture factory in Jiangsu processed custom-shaped metal table and chair legs, with a daily output of 500 pieces, and reduced labor costs by 60%. Its ±0.01mm positioning accuracy and 15 bends per minute bending speed, compared with hydraulic machines, increase efficiency by 2 times.