Procedure – Powder/Chip Samples
Prepare the instrument as outlined in the operator's instruction manual.
Login a minimum of three Blank reps.
Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open. Insert a *** Nickel Capsule (leave capsule open) into the open port at top of loading head.
Note: samples using automation should be placed in the appropriate autoloader position before starting the analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.
美国力可LECO氧氮氢分析仪
公司介绍：
美国力可公司(LECO)始于1936年 ，以生产用于冶金、机械、能源、化工、农业、食品及科研开发领域的各种分析仪器。
ONH836氧气/氮气/氢气元素分析仪设计用于使用惰性气体熔融技术对无机材料，铁和非铁合金以及耐火材料中的氧，氮和氢含量进行宽范围的测量。
坚固的样品加载区域可简化日常维护并大程度减少大气污染
用于氧气检测的三重红外电池可实现业内大的检测范围
通过自动化选项提高实验室生产率
可用的自动清洁器大程度地减少了两次分析之间的手动清洁需求
适用于坩埚和样品的20位往复式装载机
安装在动臂上的触摸屏界面可提供更好的人体工程学设计和直观的操作
红外（IR）和热导率（TC）检测器，没有活动部件，也无需手动调节
改善TC电池的稳定性
可绕过的OMI-2载气洗涤塔，提高了TC电池的稳定性
获得Dyanamic流量补偿可进一步增强TC细胞的稳定性
安徽LECO氧氮氢分析仪***电极炉头设计，提高脉冲炉热交换效率。
Procedure – Powder/Chip Samples
Determine the instrument blank.
Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.
Repeat steps 2b through 2g a minimum of three times.
Set the blank following the procedure outlined in the operator's instruction manual.
Instrument calibration/drift correction.
Login a minimum of three Standard reps.
Weigh approximately *** grams of a calibration/drift standard into a *** Nickel Capsule; enter the mass and standard identification into appropriate rep fields. If applicable, place the nickel capsule in the appropriate autoloader position.
Sample Preparation
Sampling and sample preparation of refractory metals such as titanium and zirconium is somewhat different from that of steel. Unlike steel samples, hydrogen is not as mobile in this group of materials; therefore, storage in liquid nitrogen or dry ice is not required. However, it is important to keep the sample cool when cutting or sectioning. Sample preparation for oxygen and nitrogen determination has beendifferent from that of hydrogen determination.
分析软件同时包括实时的环境参数的监测，提供完整的系统图表的模拟。
Software Features & Benefits
Cornerstone brand software is divided into four main sections—Analysis, Diagnostics, Settings, and Instrument—for simplified navigation and organization. Toolbars, sliders, and drop-down menus makeit easy to set parameters for calibration and data processing. The software also includes real-time ambient monitors, with fully animated system diagrams. Advanced diagnostic features include a thorough digital on-board manual, maintenance animations, photo illustrations, and screen captures that quickly provide the direction needed without having to refer to multiple manuals. also Cornerstone supports extended data archiving and flexible reporting capabilities. 力可***仪器采用触摸屏技术和在线软件平台，增强了仪器的可操作性、降低了分析成本、节省实验室桌面空间。江苏美国LECO分析仪供应商
新型气路管道减少气路连接阀，使得漏气，断路故障更少。湖南LECO氧氮氢分析仪
Instrument Highlights and Features
Features and Benefits
LED light ring illuminates the furnace area
Choice of either argon or helium carrier gas
Novel electrode design increases heat transfer efficiency for increased stability
Non-touch interface systems are also available
User-friendly brand software
High-Performance Detector Design
Thermostatic construction provides increased protection from ambient temperature fluctuations
Optimized emitter control and detection circuitryimproves the IR cell lifetime and long-term stability,
resulting in superior accuracy and precision
Infrared detection for the determination of oxygen, thermoconductivity detection for the determination
of nitrogen
湖南LECO氧氮氢分析仪