浙江进口分析仪价格

Software Features & Benefits

Cornerstone brand software is divided into four main sections—Analysis, Diagnostics, Settings, and Instrument—for simplified navigation and organization. Toolbars, sliders, and drop-down menus makeit easy to set parameters for calibration and data processing. The software also includes real-time ambient monitors, with fully animated system diagrams. Advanced diagnostic features include a thorough digital on-board manual, maintenance animations, photo illustrations, and screen captures that quickly provide the direction needed without having to refer to multiple manuals. also Cornerstone supports extended data archiving and flexible reporting capabilities. 高性能的红外检测器配置***恒温绝热技术，消除了外界环境温度的干扰。浙江进口分析仪价格

ONH836氧氮氢分析仪

高频燃烧红外检测技分析无机材料中的碳、硫含量。

采用惰性气体保护熔融法，提供各种无机材料、钢铁、有色金属、硬质合金、难熔金属、陶瓷等材料中宽范围的氧氮氢同时分析。

该仪器配置MS Windows®的软件接口，专为触摸屏操作定制。长期的开发研究与客户反馈相结合，这个简单方便的软件使得用户可以快速完整访问仪器控制，分析设置，故障诊断，数据报告， **提高日常分析的效率并节省用户宝贵的时间。 可选的Cornerstone® Mobile软件功能，使得用户可以在手机，便携式电脑及台式电脑上便捷的访问仪器数据，分析曲线图形以及仪器的状态，实现对仪器的遥控。

浙江LECO氧氮氢分析仪供应商稳固的炉头试样加载结构。

Procedure - Solid Samples

Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

Clean the upper and lower electrode manually, or, if applicable, remove the crucible and press the analyze button to clean with the automatic cleaner

Add approximately 0.05 g of *** Graphite Powder to a *** Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically

Sample Preparation

Typically, titanium and zirconium samples are chemically etched to remove surface contamination when oxygen and nitrogen are determined. However, etching can introduce hydrogen into the sample.

ASTM method E 1409 "Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert

Gas Fusion Technique", as updated in 1996, permits either etching or abrading (filing) of the test specimen.

ASTM E 1447 "Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal

Conductivity/Infrared Detection Method" permits surface preparation by abrading (if necessary to remove

contamination). Differences in sample preparation present somewhat of a dilemma regarding simultaneous

determination of O, N, and H in titanium. However, abrading samples with a file to remove surface

contamination will yield accurate O, N, and H results. The ONH836 utilizes a high-power electrode furnace to quickly and efficiently release the target gases from within the sample, which allows for a very rapid simultaneous determination of oxygen, nitrogen, and hydrogen.

氧氮氢分析仪的常见故障及解决方法：

氧和氮空白值超过20。这是由于气流小，不能将炉子中的空气驱赶出去。可调节气体流量，调节载气压力在0.2~0.4MPa。接通仪器载气，放一个石墨坩埚在下电极上，打开主电源开关，点击软件上的关炉按钮，关闭炉子并等待10s。调节流量调节器，直到流量计a显示为30L／h，打开炉子。调节调节器直到流量计b显示为50L／h，再次关闭炉子。如果以上设置不稳定，则增加流量至100L／h，反复调节直至仪器稳定。 ***红外池的恒温绝热技术消除了外界环境温度的干扰。新疆专业元素分析仪多少钱

长寿命的红外发射光源和无漂移的电路设计保证检测器的长期稳定性。浙江进口分析仪价格

仪器的亮点和优势：

特点和优势

·炉头区域LED照明系统

·炉头快速拆装的粉尘过滤装置

·装有自动旁路阀的可快速拆装氧水捕集装置

·专利的动态流量补偿（DFC）保证热导池气体流量、压力恒定

高效脉冲炉冷却系统

·强力内循环水冷装置热交换效率

·双直流风扇保证持续冷却，不受电压波动的影响

·***电极炉头设计，提高脉冲炉

全自动分析系统（可选）

·自动清扫装置

·20位或100位全自动分析系统

·高效全自动真空除尘装置直接将粉尘排至仪器外部捕集器中，消除环境污染

改进的红外检测池技术

·***红外池的恒温绝热技术消除了外界环境温度的干扰

·长寿命的红外发射光源和无漂移的电路设计保证红外检测池的长期稳定性

·氧高低双量程采用3个碳红外检测器同时检测一氧化碳和二氧化碳，保证准确定量 浙江进口分析仪价格